echo "        YW Mod init 2021-08-17 001"
echo "/sbin/mdev" > /proc/sys/kernel/hotplug

KERNEL_MOD_DIR=/appset/ko
NVP6124_FORMAT=0x31
NVP6124_MUX_MODE=4

insmod $KERNEL_MOD_DIR/kwrap.ko
insmod $KERNEL_MOD_DIR/kdrv_hwcopy.ko
insmod $KERNEL_MOD_DIR/nvt_dmasys.ko
insmod $KERNEL_MOD_DIR/nvt_drv_sys.ko
insmod $KERNEL_MOD_DIR/log.ko

insmod $KERNEL_MOD_DIR/ms.ko max_channels=8
insmod $KERNEL_MOD_DIR/em.ko max_channels=8

insmod $KERNEL_MOD_DIR/lcd_codec.ko
insmod $KERNEL_MOD_DIR/nvt_tve100.ko hotplug_enable=0
insmod $KERNEL_MOD_DIR/nvt_hdmi20.ko
insmod $KERNEL_MOD_DIR/flcd300-common.ko
insmod $KERNEL_MOD_DIR/flcd300-drv.ko
insmod $KERNEL_MOD_DIR/flcd300-pip.ko gui_ddr=0 suspend_state=1 
insmod $KERNEL_MOD_DIR/flcd200-common.ko
insmod $KERNEL_MOD_DIR/flcd200-drv.ko
insmod $KERNEL_MOD_DIR/flcd200-pip.ko gui_ddr=0 suspend_state=1

insmod $KERNEL_MOD_DIR/common_ioctl_kdrv.ko

insmod $KERNEL_MOD_DIR/vcap316_common.ko
insmod $KERNEL_MOD_DIR/vcap316_host0.ko sync_time_div=90 ts_sync_time=300

insmod $KERNEL_MOD_DIR/kdrv_vpe.ko
insmod $KERNEL_MOD_DIR/kflow_vpe.ko mod_init=1 max_chip_num=1 max_eng_num=1 max_minor_num=255 max_total_cam_ch=49 sw_bal_mode=1

insmod $KERNEL_MOD_DIR/nvt_audio.ko
insmod $KERNEL_MOD_DIR/kflow_audio.ko

insmod $KERNEL_MOD_DIR/kdrv_dei.ko sw_bal_mode=1
insmod $KERNEL_MOD_DIR/kflow_dei.ko max_chip_num=1 max_eng_num=1 max_minor_num=255 max_total_cam_ch=25

insmod $KERNEL_MOD_DIR/kdrv_jpg.ko jpeg_enc_max_chn=44 jpeg_dec_max_chn=16
insmod $KERNEL_MOD_DIR/kdrv_jpgdec.ko
insmod $KERNEL_MOD_DIR/kdrv_venc.ko h26x_enc_max_width=2560 h26x_enc_max_height=1440 max_total_cam_ch=44
insmod $KERNEL_MOD_DIR/nvt_vencrc.ko
insmod $KERNEL_MOD_DIR/kflow_videoenc.ko
insmod $KERNEL_MOD_DIR/h26xdec.ko h26xd_max_width=2560 h26xd_max_height=1440 max_total_cam_ch=16
insmod $KERNEL_MOD_DIR/kflow_videodec.ko

insmod $KERNEL_MOD_DIR/kdrv_osg.ko
insmod $KERNEL_MOD_DIR/kflow_osg.ko  max_pattern_width=1280  max_pattern_height=720 target_img_fmt=1
insmod $KERNEL_MOD_DIR/kdrv_ssca.ko
insmod $KERNEL_MOD_DIR/kdrv_age.ko
insmod $KERNEL_MOD_DIR/kflow_gfx.ko

insmod $KERNEL_MOD_DIR/kdrv_ai.ko
insmod $KERNEL_MOD_DIR/kflow_ai.ko

insmod $KERNEL_MOD_DIR/gs.ko max_channels=8
insmod $KERNEL_MOD_DIR/usr_proc.ko
insmod $KERNEL_MOD_DIR/vpd.ko quiet=0 max_channels=4
insmod $KERNEL_MOD_DIR/ddr_arb.ko

insmod $KERNEL_MOD_DIR/yw_gpio_test.ko  sd_power_gpio=46
insmod $KERNEL_MOD_DIR/yw_dts_ver.ko

#H155E USB  WiFi
insmod $KERNEL_MOD_DIR/ssvdevicetype.ko 
insmod $KERNEL_MOD_DIR/ssv6200s_hwif_hal.ko
insmod $KERNEL_MOD_DIR/ssv6200_hci.ko
insmod $KERNEL_MOD_DIR/ssv6200s_core.ko
insmod $KERNEL_MOD_DIR/ssv6200_usb.ko

insmod $KERNEL_MOD_DIR/8733bu.ko
insmod $KERNEL_MOD_DIR/8821cu.ko

#insmod $KERNEL_MOD_DIR/aic_load_fw.ko
#insmod $KERNEL_MOD_DIR/aic8800_fdrv.ko
#insmod $KERNEL_MOD_DIR/8188eu.ko

echo doing mdev-s
mdev -s

# Syntax: module_init  [dtb_file] [is_dump_dts] [is_init_videocap] [is_init_videoout] [is_init_audio] [is_show_logo] [nvp6124 mux mode]
/appset/ko/module_init /appset/ko/cfg_mem.dtb 0 $NVP6124_FORMAT 1 1 0 $NVP6124_MUX_MODE
insmod $KERNEL_MOD_DIR/nvp6124_kdrv.ko test_mode=0 default_mode=$NVP6124_FORMAT mux_mode=$NVP6124_MUX_MODE
#Set DDR to "dynamic high"
echo w dy_pri 5 1 0 > /proc/nvt_drv_sys/dram_info

mount -t debugfs none /sys/kernel/debug
mkdir /dev/mqueue
mount -t mqueue none /dev/mqueue

feeder 1

date -s "1970-01-01  18:00:00"
hwclock -t

/appset/script/startup_k5p2.sh